Envin Scientific use our many years of industry experience and technical expertise to develop gas monitoring and control products that meet our customers’ needs and adhere to industry standards. Our products can detect hazardous gases quickly, alerting you to the presence of combustible gas, oxygen depletion and other gas hazards at the earliest opportunity.
These include equipment produced to the specific requirements of our clients, for gas detector and monitoring applications, and to sound the alarm when detected levels are above safe limits, or where toxic gases are present.
Some of the gases that these systems can detect include:
– Carbon Dioxide
– Carbon Monoxide
– LPG
– Ozone
– Refrigerant gases
We have a particular specialism in ozone monitoring and control devices, and we can also supply temperature and humidity sensors, as well as gas sensor modules.
You’ll find more information about some of these systems below, so scroll down to read more or visit any of the pages in this section of the website for product datasheets.
Ozone Handheld Monitors and Sensors
Handheld ozone monitors and sensors make it easy to detect ozone levels wherever you need to, even in the absence of a mains electricity supply.
Envin Scientific’s handheld ozone monitor is a portable gas detector, equipped with a rechargeable battery so you can use it anywhere – simply remove the bottom-right rubber grip to uncover the charging port. These detectors are suitable on the move, or in confined spaces where fitting a fixed unit is not ideal.
The device has a default alarm setting of 180 ppb ambient ozone, but this can be adjusted anywhere up to 250 ppb to suit your application.
In use, if the ambient ozone level detected is greater than the alarm setting, the device will sound an audible alarm and light an LED for both an audio and visual warning.
The ozone sensor is pre-calibrated during manufacture but can also be replaced on-site so there is no need to return the detector unit to the factory when the sensor needs changing.
Compact, convenient and rugged, with a full automatic system check on every start-up to give you total confidence every time you switch it on.
Ozone Mains Monitors and Sensors
Our mains-powered ozone monitors and sensors can be wall-mounted so that they provide continual in situ ozone detection in critical environments.
Each fixed gas detector is fitted with power, warning and alarm LEDs, as well as a 90 dB alarm sounder that is activated if ozone levels rise above both the warning and alarm levels.
As standard these two levels are set at 100 ppb and 180 ppb but like our handheld sensors, they can be adjusted to anywhere up to 250 ppb as required.
The alarm state can also activate an internal relay circuit, providing a volt-free or 12V direct current output to allow the ozone monitor to act as a switch for other alarm equipment.
As with the handheld monitor, our mains-powered ozone monitors run a system check on start-up, signified by illuminating the LEDs, after which the LEDs will turn off (except the power light) and ozone monitoring will begin.
Handheld Ozone Generator
If you need to test the condition of the sensor inside your ozone monitor or any other component in the system, we also supply handheld ozone generators.
These are battery-operated so they are highly portable and can be used to test all of your wall-mounted and portable ozone sensors.
Like the handheld ozone detectors, the batteries in the handheld ozone generator are rechargeable, making it even easier to keep sufficient power in the device for periodic testing.
Find out more
If you want to know more about Envin Scientific’s handheld ozone sensors or wall-mounted mains-powered ozone detectors, visit the individual product pages for more including product images and downloadable PDF datasheets.
For any remaining questions or queries, please don’t hesitate to get in touch using any of our usual contact details.
The Envin Scientific team are here to help and can make recommendations for other gas monitoring and detection applications such as CO2, refrigerant gases and LPG.
Need something bespoke?
We have years of experience developing gas leak detectors products for a wide range of applications, so if you need something unique, please contact us and we can talk through the best options to give you what you need.
Envin Scientific work with our customers to enable you to develop your own gas detection system and monitoring equipment where appropriate, powered by reliable, calibrated sensors that meet the necessary industry standards.
You might also find useful information elsewhere on our website, including:
– CO2 Detectors & CO2 Sensors
– Oxygen Sensors and Analysers
– Temperature and Humidity Detectors
– Pilot Gas Alarms for LPG detection
Again, if you have a specific need that is not mentioned above, we may still very likely be able to help, so please call your Envin Scientific representative or contact us using any of the details on our website to let us know what you need.
